100G CFP2 LR4 1310NM 10KM SMF
- 型号 : GCF2-100G-LR4
- 100G CFP2 LR4 1310NM 10KM SMF
-
gz-link CFP2 100G LR4 are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber.
They are compliant with the CFP MSA1, IEEE 802.3ba 100GBASE-LR42 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39). Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC3.
- Hot-pluggable CFP2 form factor
- Supports 103.1Gb/s and 112Gb/s aggregate bit rates
- Power dissipation < 8W
- RoHS-6 compliant (lead-free)
- Commercial case temperature range of 0°C to 70°C
- Single 3.3V power supply
- Maximum link length of 10km on Single Mode Fiber (SMF)
- 4x28Gb/s DFB-based LAN-WDM transmitter
- 4x28G electrical interface
- Duplex LC receptacles
- MDIO management interface
| Package (Form Factor) |
CFP2 LR4 |
| Data Rate (typical) |
25.78~27.95Gbps/CH |
| Centre Wavelength |
1310nm(Center) |
| Distance |
10KM SMF |
| Diagnostics |
Digital Monitor |
| Transmitter |
4x28Gb/s DFB |
| Receiver |
PIN photo detector |
| TX Output Power (dBm) |
-2.9~+4.5 |
| RX Sensitivity (dBm) |
-9.2 |
| Low/High Case Temperature |
0°C~70°C |
| Voltage Supply (typical) |
3.3v |
| Connector |
Duplex LC/UPC |
- OTN OTU4 4I1-9D1F
- 100GBASE-LR4 100G Ethernet
